New Products
November 2020 Issue

0

Pulsar

Pulsar introduces the ultra-powerful Thermion XG50 thermal riflescope. This riflescope boasts 640×480 microbolometer strength and 12-micron pixel detail to detect heat signatures out to 2,400 yards. It’s the first riflescope to combine a BAE sensor, onboard recording and multiple color palettes. Its 1024×768 AMOLED display gives users sharp, clear images, and its continuous digital zoom ensures varmint, hogs and big game are easily located. With a stadiametric rangefinder and rock, forest and identification viewing modes, the XG50 misses nothing. The XG50 also boasts a defective pixel repair feature, guaranteeing long-lasting quality.

(817) 225-0310

pulsarnv.com

Heybo Outdoors

The Granger Barn Coat from Heybo Outdoors is constructed with a cotton canvas material to handle the wear-and-tear of daily labor without causing the wearer to overheat and is embellished with a corduroy collar. Two top-loading pockets and two loading flap pockets accommodate tools and accessories. Built for tough tasks in harsh conditions, the Granger Barn Coat is also stylish enough to be worn casually on brisk fall and winter days. It’s part of Heybo’s Working Man Collection, which also includes the Stonecamp Brushed Flannel shirt and Sportsman Field Pant.

(803) 385-1140

heybooutdoors.com

Hogue Inc.

Hogue Inc. announced the Wrapter Adhesive Firearm Grip line. Utilizing the same precision-fit standards as OverMolded rubber grips, Hogue has engineered a remarkably thin grip solution for polymer-frame pistols. Wrapter Adhesive Grips are available in a soft rubber material and are designed to conform to the exact contours and features of popular polymer-frame models. Sweat-resistant and non-irritational properties provide a natural and comfortable grip experience. The adhesive is designed to create a long-lasting bond when activated by heat, but can also be removed without leaving a sticky residue behind. Wrapter Grips are available for a variety of popular handgun models as well as a DIY solution.

(800) 438-4747

hogueinc.com

Ed Brown Products Inc.

Ed Brown expands its 1911 FX Series with the introduction of the FX2. The FX2 features FX slide cuts, American flag serrations and a recessed slide stop with serrated pin, but in a Commander Bobtail configuration with Brown’s popular Snakeskin treatment. Topped with Trijicon’s new RMRcc, Ed Brown designed co-witness rear sight and an AmeriGlo orange front sight, the FX2 is ideal for concealed carry. It’s finished in industrial stainless steel for an edgy look, with black accents on the trigger and barrel bushing complementing the black G10 grips. It’s available in .45 ACP or 9mm.

(573) 565-3261

edbrown.com

Davidson’s Inc.

Produced in collaboration with Ruger, Davidson’s exclusive 10/22 Target Rifle features a truly ambidextrous Altamont laminate thumbhole stock. Coupled with the thumbhole stock is a 16.125” cold hammer-forged stainless bull barrel. The barrel is fluted to reduce weight and dissipate heat and is threaded with a 0.5”-28 pattern to accommodate barrel accessories. Ruger’s BX-Trigger is a standard feature and boasts a light, crisp 2.5–3 lb. pull weight with minimal overtravel and a positive reset. The rifle weighs 5 lbs., has a 31.25” OAL and includes one 10-round rotary magazine and a thread protector.

(800) 367-4867

davidsonsinc.com

Red Arrow Weapons

The RAW10 .308 Win. AR-style rifle from Red Arrow Weapons (RAW) features an 18” fluted stainless barrel with 1:10” twist rate and single-stage CMC trigger with 2.5-lb. pull. The 15” M-LOK RAW-Rail ties together the forged T-7075 aluminum upper and lower receivers. The RAW10 boasts a Magpul K Grip and ACS-L carbine stock, and its BCGs are put through a black nitrite process and have a high-pressure firing pin. The 8 lb., 7.5 oz. rifle is finished in Midnight Bronze Cerakote and has a 39” OAL.

(833) 940-0068

redarrowweapons.com

Nightstick

Designed to securely mount to the front of the trigger guard and dustcover of GLOCK G42, G43, G43X and G48 pistols, the li-ion powered TSM-11G from Nightstick features a magnetically coupled MagMate USB charging cable eliminating the need to continually replace multiple disposable coin cell batteries. The TSM-11G’s white light and green laser are designed to maximize threat identification and target discrimination in a variety of applications. The light’s dual switches provide the user tactile click actuation in momentary or constant-on use. The TSM-11G delivers a 150-lumen bright white beam for 45 minutes to illuminate objects and threats up to 341’ away. At a scant 1.3 oz., the light is constructed of durable, impact-resistant engineered polymer and rated as IP-X4 water-resistant.

(800) 233-2155

nightstick.com

Luth-AR

The Widebody Palm Handguard for AR carbines and rifles from Luth-AR conforms to the palm of the user’s hand and provides a wide, flat surface to lay on a shooting bag or other support for maximum stability. Perfect for hunters, precision or 3-Gun competitors, the 15” length houses M-LOK slots along the upper-side flat, and three rows of slots on the bottom flat. Widebody Palm Handguards are made from a black hard-coat anodized 6061-T6 aluminum extrusion, and include a barrel nut made from alloy steel with a Melonite finish.

(763) 263-0166

luth-ar.com

Optical Dynamics

The Exude OD40 Gen II from Optical Dynamics (product of Umarex USA) is a micro USB rechargeable predator and searchlight with three brightness settings. Its 40mm bell houses a set of photonic lenses that focus its powerful CREE LED to offer a harmonized beam of pure light and a wide field of view by lighting up a 34.5’ area at 100 yards. When used in combination with a high-quality riflescope, predator and target identification is possible out to 235 yards. The OD40 will run up to 3 hours on its low setting. It projects 100% of the light into one spot instead of “spilling” and “dispersing” reflected light. The OD40 also includes both amber and green lenses inside a robust zipper case.

(479) 646-4210

exudelight.com

Plano

Using Plano’s Restrictor technology, the All-Weather 2 Rifle Case (AW2) blocks rust and corrosion five times longer than competing products due to its rust-preventive Vapor Corrosion Inhibitor infused resin and foam emitter. The pre-perforated pluck foam allows easy customization. A pressure-release valve equalizes pressure caused by altitude or temperature changes, and the continuous Dri-Loc seal creates a watertight, dust-proof shield. Dual-stage lockable latches and rugged, industrial-strength construction keep firearms safe and secure. AW2 cases are available in 36”, 42” and 45” models.

(800) 226-9868

planomolding.com

N8Tactical

N8Tactical’s OT2 Combat Cut Holster is an exceedingly comfortable IWB holster that merges N8 Tactical’s Original Holster and Tuckable Holster designs into an all-new platform. The Combat Cut design allows for a full grasp on the pistol’s grip while drawing. Built on a durable leather form, the holster comes with a soft suede backing and a moisture-proof neoprene core situated between the two. The suede backing is comfortable on bare skin or when worn over thin shirts while the neoprene core prevents moisture buildup. The clip design and location allows shirts to be tucked for a more formal appearance. The holster is designed to accommodate mid- and full-size pistols, with broad model compatibility and accommodations for lights and lasers.

(888) 732-5011

n8tactical.com

Aim Sports Inc.

Aim Sports Inc.’s Wraith Fire M-LOK Handguards are designed and built to fit most Mil-Spec AR-15/M4 upper receivers. Boasting one of the easiest mounting systems to install, the M-LOK slim-line handguards provide superior fit, finish and performance. Wraith Fire handguards work with low-profile gas blocks and have seven rows of mounting surface, a streamlined 1913 Picatinny top rail and are Type III hard-coat anodized. The handguards are available in 10”, 13.5” and 15” lengths.

(909) 923-2228

aimsportsinc.com

Pelican Products Inc.

Pelican Products introduced the EZ-Click MOLLE panel system — the first lid organizer of its kind that can be quickly released and swapped out without tools. The EZ-Click panel is secured with exclusive swing-cam latches for rapid mounting and removal. With quick access to the back of the grid panel, users can easily switch out an unlimited combination of user-supplied MOLLE-style pouches and Velcro brand straps to organize gear. Five models are available: the Pelican 1510 Carry On Case, the Pelican Air 1535 Carry On Case, the Pelican 1560 Case, the Pelican 1610/1620 Case and the Pelican 1650 Case.

(844) 805-8142

pelican.com

TRUGLO Inc.

TRUGLO’s TAC•POD Carbon Pro Bipod features a lightweight and compact design with adjustable folding legs ideal for bench or prone shooting while maintaining maneuverability in the field. Constructed from carbon fiber and aluminum, the TAC•POD Carbon Pro offers maximum strength with minimum weight. The mount quickly attaches to Picatinny-style rails and has a rotating design for easy shooting angle adjustment without repositioning the legs. Padded rubberized feet provide positive grip retention and the pivoting base offers precision leveling on uneven surfaces. It’s available in two models: short (6”-9”) and long (9”–13”).

(888) 887-8456

truglo.com

Sector Optics

Sector Optics’ Specialized Riflescope Rings & Mounts feature a Picatinny rail on the top of the front ring, allowing users to mount the T20x or T3 thermal imager on top of most 30mm or 34mm riflescopes. The rings and mounts are constructed of durable, aircraft-grade anodized aluminum and come in a matte black color. The rings easily and quickly attach to Picatinny rail or Weaver-style bases. The 30mm rings come in low, medium and high sets and the 34mm rings in medium and high sets.

(858) 755-4549

sectoroptics.com

Click To Read More Shooting Industry November 2020 Issue Now!